Applicable places:

Biological laboratory use

Product Features:

LSP01-1C The syringe pump is a single-channel two-way push-pull syringe pump, mainly used in laboratories, suitable for small flow, high precision and continuous transmission of liquids. LSP01-1C Push and pull syringe pump can hold 10 cards μl-10ml Specifications of syringes (Sampler ) ，Can install syringes with different specifications within the specified range of card (Sampler )。

Functional Features

LSP01-1C Syringe inner diameter input function: You can select the syringe from the list or directly enter the syringe inner diameter to determine the syringe
Easy to operate: Large-screen LCD display, digital knob and film buttons are intuitive, simple and fast
Working mode: perfusion working mode
Power-down memory function: 1. EEPROM Save the settings parameters, after powering on again, there is no need to reset 2. Power off during operation in flow mode. After powering on, you can continue to run or stop according to the set parameters.
Traffic jam protection function: When the propulsion mechanism of the syringe pump is blocked during work, the syringe pump will stop the operation of the propulsion mechanism and issue a whistle alarm.
Using 485 communication bus can be connected to the upper computer and control it through the background.
External control interface: with input /Output control function
Fluid calibration function: More accurate flow can be obtained through calibration procedures

Syringe protection function: By adjusting the position of the limit block, the syringe can be prevented from being damaged.

Technical Indicators

Push-pull syringe pump LSP01-1C Working mode: Injection and extraction are carried out simultaneously and continuously
Number of channels: 1
Maximum itinerary: 140 mm
Travel resolution: 0.156 μm
Linear speed range: 5 μm/min-65mm/min
Linear speed adjustment resolution: 5 μm/min
Stroke control accuracy: Error ≤±0.5%(journey ≥When the maximum itinerary is 30% )
Rated linear thrust: ＞90N
Syringe selection: built-in main manufacturers and main models of syringes for selection
Syringe customization: can be directly input into the syringe
Flow calibration: Get more accurate liquid volume through the calibration procedure
Operation parameter settings: injection volume, injection time, etc.
Display parameter selection: liquid volume, flow rate or linear speed
Power down memory: After powering on again, you can choose whether to continue working according to the state before power down.
Status signal output: 1 channel OC Gate signal output, used to indicate activation /stop
Control signal input: 2 start-stop control inputs, 1 fallen edge trigger signal control start-stop； 1 way TTL Level signal control start and stop
Communication interface: RS485
Dimensions: 280 ×220×140(mm)
Weight: 3.6 kg
Use power supply: AC 90V-260V/15W
Working ambient temperature: 0 ℃-40℃
Relative humidity of the working environment: ＜80%