Product Features:

TJ-1A/L0107-1A It is a single-channel single-push mode trace split injection pump, mainly used in biological laboratories. The controller and execution unit are split structures, and the execution unit has a clamping mechanism. TJ-1A/L0107-1A The syringe pump is precise, compact, easy to install and convenient to operate. Can be installed μL Specification of standard sampler, accurate stroke control and ultra-wide range of linear speeds (7.9μm/min ～79.4mm/min)Can satisfy applications for different users. The vertical installation structure can be conveniently used with biological instruments such as microscopic operators and brain stereotactic instruments, and is widely used in various biological experimental fields.
The product has been approved CE Certification:

Functional Features

Working mode: perfusion mode
Custom Injector: can store four user-defined injector inner diameters
Linear thrust output: full range > 20N The operation uses the feel of the film button, which is simple and intuitive
Power-down memory function: After power-up is re-activated, work according to the status of the last power-down
Signal output function: two channels OC Door switch signal output, used to indicate the start of the syringe pump /Stop and direction status
Flow correction function: obtain more accurate liquid volume through calibration operation
Fast forward and fast reversal functions: full-speed infusion or extraction of liquid

Technical Indicators

Working mode: Injection
Number of execution units: 1
Maximum itinerary: 70 mm
Travel resolution: 0.165 μm
Linear speed range: 7.94 μm/min-79.4mm/min(flow =Linear speed ×Internal cross-sectional area of the syringe )
Linear speed adjustment resolution: 7.94 μm/min
Stroke control accuracy: Error ≤±0.5%(journey ≥When the maximum itinerary is 30% )
Rated linear thrust: ＞20N
Syringe selection: built-in main manufacturers and main models of syringes for selection
Syringe customization: can store four user-defined syringe inner meridian values
Flow correction: Get more accurate liquid volume through the calibration procedure
Operation parameter settings: distribute liquid volume, injection time, etc., so that all channels can use the parameters of the specified channel.
Start parameter settings: each execution unit starts separately, each execution unit starts delayed, and each execution unit starts synchronously
Display parameter selection: liquid volume, flow rate or linear speed
Power down memory: After powering on again, you can choose whether to continue working according to the state before power down.
fast forward (retreat )Function: Inject or draw liquid at full speed
Status signal output: 2 channels OC Gate signal output, used to indicate activation /Stop and direction status
Control signal input: 3 signals ( TTL Level) input, used to control start-stop, fast forward, and fast backward
Communication interface: RS485
Controller size: 170 ×108×65(mm)
Controller weight: 0.5 kg
Exemplary dimensions of the execution unit: 180 ×46×78(mm)
Execution unit weight: 0.6 kg
Use power supply: AC 90V-260V/10W
Working ambient temperature: 0 ℃-40℃
Relative humidity of the working environment: ＜80%

Other parameters