Applicable places:

Biological laboratory use

Product Features:

TJ-3A /W0109-1B It is a single-channel micro-syringe pump, mainly used in laboratories, with the controller and execution unit in a split structure. TJ-3A /W0109-1B The syringe pump has a compact structure, powerful function and convenient operation. It can be installed mL Specifications of multiple standard syringes, stroke control and ultra-wide range of linear speeds (7.9 μm/min～79.4mm/min） Can satisfy applications for different users. Split structure, easy to install, combine and expand at will, greatly adapting to various user operation needs ； Suitable for experimental needs in different application fields.
The product has been approved CE Certification:

Functional Features

Custom syringe: can store four user-defined syringe inner diameters
You can select the syringe from the list or directly enter the syringe inner diameter to determine the syringe
Linear thrust output: full range ＞90N
Signal output function: two channels OC Door switch signal output, indicating the start of the pump /Stop and direction
Flow correction function: obtain more accurate liquid volume through calibration operation
Syringe protection function: By adjusting the position of the limit block, the syringe pump can be protected from damage
Block into (retreat )Function: Filling or drawing liquid at full speed
The 485 communication bus can be connected to the upper computer and control it through the background.
External control input interface: external start /Stop input
Control output interface: two channels OC Door switch signal output, indicating the start of the pump /Stop and direction

Technical Indicators

Working mode: injection, draw, injection first, then draw, first draw, then injection, continuous
Number of execution units: 1
Maximum itinerary: 90 mm
Travel resolution: 0.165 μm
Linear speed range: 7.94 μm/min-79.4mm/min(flow =Linear speed ×Internal cross-sectional area of the syringe )
Linear speed adjustment resolution: 7.94 μm/min
Stroke control accuracy: Error ≤±0.5%(journey ≥When the maximum itinerary is 30% )
Rated linear thrust: ＞90N
Syringe selection: built-in main manufacturers and main models of syringes for selection
Syringe customization: can store four user-defined syringe inner meridian values
Flow correction: Obtain accurate liquid volume through calibration procedures
Operation parameter settings: liquid allocation volume, injection time, extraction time, interval time, allocation times, etc. Each channel can be set separately, allowing all channels to use the parameters of the specified channel.
Start parameter settings: each execution unit starts separately, each execution unit starts delayed, and each execution unit starts synchronously
Display parameter selection: liquid volume, flow rate or linear speed
Power down memory: After powering on again, you can choose whether to continue working according to the state before power down.
fast forward (retreat )Function: Inject or draw liquid at full speed
Status signal output: 2 channels OC Gate signal output, used to indicate activation /Stop and direction status
Control signal input: 3 channels TTL Level signal input, used to control start-stop, fast forward and fast back
Communication interface: RS485
Controller size: 170 ×108×65(mm)
Controller weight: 0.5 kg
Exemplary dimensions of the execution unit: 245 ×100×95(mm)
Execution unit weight: 1.3 kg
Use power supply: AC 90V-260V/10W
Working ambient temperature: 0 ℃-40℃
Relative humidity of the working environment: ＜80%

Other parameters