Applicable places:

Biological laboratory use

Product Features:

TJ-4A/SL0104-1A、TJ-4A/SL0107-1A The type of syringe pump is two new syringe pumps that are particularly suitable for the field of veterinary medicine. They are small in size and light in weight, making them easy to install into brain stereotactic instruments and microscopic operators. By installing 0.5 μl—50μl The micro-sampler can dispense samples with an upgrade volume while having an ultra-wide range of linear velocity (3 um/min～128mm/min） Can meet a wide range of applications for different users. in SL0104-1A It is based on 30 mm The stroke sampler is designed (our company customized the Shanghai Gaoge short sampler for this type of syringe pump), which is small in size and light in weight (only 258 g）， It is best used with a mouse brain stereotactic device. SL0107-1A Suitable for most 50 on the market μL Manual glass sampler within.
By TJ-4A Controllers are used in conjunction with each other, and they can be transformed into multifunctional syringe pumps, including cell injection, dispensing extremely small amounts of biochemical agents, and are isolated in in vitro fertilization and can be directly installed on microscopic operators or large, mouse brain stereotactic instruments.
TJ-4A The controller has a power-down memory function, and will be called directly the next time the operation parameters are saved. In addition, the foot switch can be selected through the controller DB15 The port connection realizes start-stop control. this DB15 The port can also be connected to the computer (computer, PLC、 Microcontroller) connects to achieve complex program control.

Functional Features

Small size and light weight, easy to use with brain stereotactic meter
Easy to use
Metal shell
Can be controlled with foot switch

Power-down memory function

New vegetative medicine syringe pump L0107 The actuator of the series of syringe pumps is greatly reduced in size

Technical Indicators

SL0104-1A、SL0107-1A:
Working mode: injection, draw, injection first, then draw, first draw, then injection, continuous
Number of execution units: 1
Maximum itinerary: SL0104-1A:40mm  SL0107-1A:70mm
Travel resolution: 3 μm
Linear speed range: 3.048 μm/min-128.016mm/min(flow =Linear speed ×Internal cross-sectional area of the syringe )
Linear speed adjustment resolution: 3 μm/min
Stroke control accuracy: Error ≤±0.5%(journey ≥When the maximum itinerary is 30% )
Rated linear thrust: ＞10N
Syringe selection: built-in main manufacturers and main models of syringes for selection
Syringe customization: can store four user-defined syringe inner meridian values
Flow calibration: Get more accurate liquid volume through the calibration procedure
Operation parameter settings: distribute liquid volume, injection time, etc., and set through the controller.
Display parameter selection: liquid volume, flow rate or linear speed
Power down memory: After powering on again, you can choose whether to continue working according to the state before power down.
fast forward (retreat )Function: Inject or draw liquid at full speed
Status signal output: 2 channels OC Gate signal output, used to indicate activation /Stop and direction status
Control signal input: 3 channels TTL Level signal input, used to control start-stop, fast forward and fast back
Communication interface: RS485
Controller size: 170 ×108×65(mm)
Controller weight: 0.5 kg
Executing unit dimensions: SL0104-1A:130×35×34(mm) SL0107-1A:160×35×34(mm)
Execution unit weight: SL0104-1A:258g  SL0107-1A:289g
Use power supply: AC 90V-260V/10W
Working ambient temperature: 0 ℃-40℃
Relative humidity of the working environment: ＜80%

Other parameters