Applicable places:

Biological laboratory use

Product Features:

LSP10-1B The syringe pump is a multi-channel push-pull mode syringe pump, mainly used in biological laboratories, and is an integrated structure. 10 card can be installed μL-10mL Specifications of syringes (Or sampler ) ，Can install syringes with different specifications within the specified range at the same time or (Sampler )。Multi-channel syringe pump LSP10-1B Suitable for high-precision and small flow liquid transmission.

Functional Features

LSP10-1B Syringe inner diameter input function: You can select the syringe from the list or directly enter the syringe inner diameter to determine the syringe
Human-computer interface: Large-screen LCD display, digital knobs and film buttons operate intuitively, simple and fast
Working mode: 5 working modes (perfusion /Draw /Perfusion first and then extraction /Draw first and then inject /Continuous work )
Power-down memory function: 1. EEPROM Save the settings parameters and after powering up again, there is no need to reset it. 2. Power off during operation in flow mode. After power-on recovery, you can continue to run or stop according to the set parameters.
Traffic jam protection function: When the propulsion mechanism of the syringe pump is blocked during work, the syringe pump will stop the operation of the propulsion mechanism and issue a whistle alarm.
Communication function: 485 communication bus can be connected to the upper computer and control it through the background.
The 485 communication bus can be connected to the upper computer and controlled by the background software.
External control interface: input /Output control function
Fluid calibration function: More precise flow can be obtained through the calibration procedure.
Syringe protection function: By adjusting the position of the limit block, the syringe can be prevented from being damaged.

Technical Indicators

Multi-channel syringe pump LSP10-1B Working mode: injection, draw, injection first, then draw, first draw, then injection, continuous
Number of channels: 10
Maximum itinerary: 140 mm
Travel resolution: 0.156 μm
Linear speed range: 5 μm/min-130mm/min(flow =Linear speed ×Internal cross-sectional area of the syringe )
Linear speed adjustment resolution: 5 μm/min
Stroke control accuracy: Error ≤±0.5%(journey ≥When the maximum itinerary is 30% )
Rated linear thrust: ＞180N
Syringe selection: built-in main manufacturers and main models of syringes for selection
Syringe customization: can be directly input into the syringe
Flow calibration: Get more accurate liquid volume through the calibration procedure
Operation parameter settings: injection volume, extraction volume, injection time, extraction time
Display parameter selection: liquid volume, flow rate or linear speed
Power down memory: After powering on again, you can choose whether to continue working according to the state before power down.
Status signal output: 2 channels OC Gate signal output, used to indicate activation /Stop and direction status
Control signal input: 2 start-stop control inputs, 1 fallen edge trigger signal control start-stop； 1 way TTL Level signal control start and stop
Communication interface: RS485
Dimensions: 280 ×330×140(mm)
Weight: 5.3 kg
Use power supply: AC 90V-260V/20W
Working ambient temperature: 0 ℃-40℃
Relative humidity of the working environment: ＜80%