one, H01-1D Main technical performance of constant temperature digital magnetic stirrer

power supply AC220V±10%                            Heating power per station: 350 W Internal adjustable

Maximum stirring capacity per station is 3000 ml                    Temperature control accuracy    ±1℃      

Stirring speed 100 ～1500r/min                      Temperature control range: room temperature ~150℃（500ml Inside)

Motor torque: 20 mN·m                           Dimension 990 ×240×130(mm)

two, H01-1D How to use a constant temperature digital magnetic stirrer

1、Before use, put the power switch in the off position (the large green switch on the operating surface of this machine is the main power switch.“ ○”Press as OFF), and turn the speed adjustment knob of each station counterclockwise to OFF， Put the small button switch in the set position, connect the lead of the temperature sensor to the rear terminal, and place the agitator smoothly；

2、Place the beaker containing the medicine liquid in the middle of the workbench (i.e., the electric furnace), place an appropriate stirrer into the beaker, and insert the temperature sensor head into the medicine liquid. Plug in and turn on the main power switch (“I” Press to On )，The built-in indicator light on the switch；

3、First adjust the speed knob to clockwise ON And adjust the required stirring speed, adjust the temperature setting knob to the desired set temperature value when the display window displays the desired set temperature value, and then turn the small button switch down to measure the position. At this time, the display window displays the temperature measured on the temperature sensor of the station. The temperature rise indicator light is on and the electric furnace starts to heat. When the temperature reaches the set temperature, the temperature rise indicator light is off and the electric furnace stops heating. If the speed adjustment knob is OFF The position will not work.；

4、When heating the beaker in the electric furnace, if the difference between the measured temperature and the set temperature is obtained ＞15℃When the electric furnace is heated at full power speed, when the measured temperature rises to the difference between the set temperature ＜15℃When the electric furnace heating power is adjusted by the pressure regulating knob, the heating power can be adjusted from 20-350 W It can be adjusted continuously between the heating temperature and the capacity can be adjusted according to the heating temperature. If the temperature is high and the capacity is large, you can take a large value and adjust it to the 8, 9, and 10 positions. It is generally adjusted from the beginning. If you find that the temperature rises slowly or cannot reach the set temperature during the heating process, please increase the heating voltage knob clockwise. If you find that the heating rises too fast and exceeds the set temperature a lot during the heating process, you should adjust the heating voltage knob counterclockwise (the key to constant temperature is to keep the heating and heat dissipation stable)；

5、If you do not need to heat but need to measure the temperature, please turn the temperature setting knob below room temperature and turn the setting measurement switch down (measurement position)；

6、After the mixer is used, the power supply should be removed, the appearance should be cleaned after cooling, and the surface should be kept properly.