SYD-0610 Type asphalt rotary film oven (85 oven )It is in accordance with the industry standards of the People's Republic of China JTG E20-2011《 Test Regulations for Asphalt and Asphalt Mixture in Highway Engineering T 0610-2011《 Designed and manufactured as required by the Asphalt Rotary Film Heating Test. Suitable for determining mass loss after heating of road petroleum asphalt rotary film. The changes in the properties of the asphalt residue after heating the rotary film are measured as needed, such as needle penetration, viscosity, ductility and brittle points of the asphalt residue are measured to evaluate the aging properties of the asphalt.

1. Main technical characteristics
1、The oven is mainly composed of electrical control parts, oven studios, and mechanical transmission devices. The constant temperature room is equipped with lighting lamps to facilitate outdoor observation of indoor working conditions.
2、An air compressor is attached in the oven to supply the air required for the test. After the air is measured by the flowmeter on the panel, it enters the copper tube in the oven ventilation duct to preheat, and then sprays it into the sample bottle on the turntable by the nozzle.
3、Use high-precision intelligent temperature control instruments to ensure that the oven temperature reaches 163 within 10 minutes that meet the test regulations and meet the requirements of the test samples. ℃±0.5℃Technical indicators.

2. Main technical parameters and indicators
1、Working power supply:       AC（220±10%）V；50Hz。
2、Heating power: 2.4 kW。
3、Studio Temperature: 163 ℃。
4、Temperature control accuracy:       ±0.5℃。
5、Turntable speed:       (15±0.2) r /min。
6、Air flow:       (4000±200)mL /min。
7、Timing device: 85 minutes alarm.
8、Ambient temperature:         (5~50)℃。
9、Relative humidity:         ≤85%。
10、Power consumption of the whole machine: not more than 2.6 kW。