The new generation of carbon dioxide incubator combines the company's more than ten years of design and manufacturing experience, always guided by customer needs, constantly researching new technologies and applying them to products, representing the development trend of carbon dioxide incubator. Has multiple design patents, using imported infrared CO2 Sensors have accurate and stable control accuracy and are not affected by temperature and humidity.

CO2 The incubator provides you with: 

◆ Faster CO2 Concentration recovery speed 

● Infrared sensors are the best choice when opening the box door frequently during the experiment.

● Infrared sensor CO2 The monitoring of concentration is not affected by temperature and humidity. If the door is opened for 30 seconds and then closed, it can recover to 37 within less than 10 minutes. ℃，Revert to 5% setting within less than 5 minutes CO2 Concentration, even if multiple people use it, it needs to open and close the door frequently. CO2 Stable and uniform concentration. Thermal conduction sensor will be affected by temperature and humidity, and its response time generally needs to be several minutes slower. If used for a long time, it needs to be calibrated frequently.

◆ UV sterilization system 

● The ultraviolet sterilization lamp is located in the back wall of the box, which can regularly disinfect the inside of the box, effectively killing the circulating air and humidification plate steam sterilization in the box, thereby effectively preventing contamination during cell culture.

◆ Microbial high-efficiency filter 

● CO2 The air inlet is equipped with high-efficiency microbial filter for diameters greater than or equal to 0.3 μm The filtration efficiency of particles is as high as 99.99%, effective filtration CO2 Bacteria and dust particles in the gas.

◆ Door temperature heating system 

● CO2 The incubator door can heat the inner glass door, which can effectively prevent the glass door from producing condensation water and prevent the possibility of microbial contamination due to the condensation water of the glass door.

◆ Automatic control of circulating fan speed 

● The speed of the circulating fan can be automatically controlled. When the temperature in the box is in a constant temperature state, the speed will decrease, and the circulating wind speed will be adjusted to a wind speed suitable for cell growth, avoiding the volatility of the sample due to excessive air volume during the test.

◆ HEPA High efficiency filter (Purchase )： 

● It can effectively filter out bacteria and dust particles in the outside air, eliminate and prevent the cross-contamination of the outside air from the incubator, and make the incubator in a sterile state.

● After the box door is closed for 5 minutes, the air quality in the box can be restored to a level 100 clean level.

● HEPA High-efficiency filters are easy to disassemble and assemble, and do not require tools.

◆ Humanized design 

● Stackable (Second floor )，It is convenient for the full use of laboratory space, and the large LCD screen above the outer door can display the temperature. CO2 Concentration value, relative humidity value, menu-style operation interface, simple and easy to understand, easy to observe and use.

◆ Safety features 

● Independent temperature limit alarm system and audio-visual alarm remind the operator to ensure safe operation of the experiment without accidents.

● It has low temperature, high temperature and overtemperature alarms. CO2 Alarm if the concentration is too high or too low.

● It has safety facilities such as alarms and UV sterilization working status reminders.

Microcomputer controller

Large-screen LCD display, using microcomputer PID Control and display the temperature at the same time, CO2 Concentration, relative humidity and operation, fault prompts, and menu-style operation are simple and easy to understand and easy to observe and use.

Data records and fault diagnosis display (Selection ) 

All information is available for RS485 Download the port to the computer to save. If a fault occurs, you can retrieve information from the computer and diagnose it in time.

Wireless alarm system (SMS Alarm System ) (Selection ) 

If the user of the equipment is not on site, when the equipment fails, the system will collect the fault signal in time and send it to the mobile phone of the designated receiving personnel through text messages to ensure that the fault is promptly eliminated, the test is restored, and accidental losses are avoided.

Technical parameters: 

 Optional purchase:(Increase the delivery time of optional parts for 7 days )