Constant temperature and humidity chamber
BSC-250

Application scope:
The constant temperature and humidity box series products have accurate temperature and humidity control systems, which provide various environmental simulation conditions required for industrial research and biotechnology testing. Therefore, it can be widely used in aseptic tests, stability inspections, as well as raw material performance, product packaging, product life and other tests of industrial products.

Features:
The shell is made of cold-rolled steel plate, with electrostatic spray on the surface, mirrored stainless steel in the inner shell, and the shelf can be adjusted at will.；
Microcomputer intelligent control, LCD display controls temperature, humidity, time, and overtemperature alarm functions；
Using an off-core fan, the air duct design allows the hot and cold to be fully mixed and then blown to the box to ensure more precise temperature and better uniformity；
Equipped with glass observation inner door；
The left and right sides of the box are equipped with a detection port joint, with an inner diameter of 30 mm、 Outer diameter is 60 mm；
Adopt internationally renowned compressors and fluorine-free refrigerants to lead the environment, efficiency and energy-saving；
Can be cultivated in a closed environment；
Standard mechanical lock to prevent door opening；
Integrated refrigeration system, multi-layer protection, safe operation and effective self-checking, adopt unconventional automatic frost without energy consumption, avoiding the impact on temperature, and allowing the equipment to be used continuously for a long time；
The humidity sensor uses imported components, uses fin humidification heating tube to humidify, and is equipped with a large capacity water tank, which can be used continuously for a long time.；
Programmable programming, can set 30 segments and 99 cycles；
match RS-485 interface；
It has parameter memory and incoming call recovery function that is protected by data loss due to power outage and crash state.

Technical parameters:
model: BSC-250
Temperature control range: 4 ℃-60℃（When not controlling the humidity), 10-40 (control the humidity)
Resolution: 0.1 ℃
Volatility: ±0.5℃
Uniformity: ±1℃（37℃hour)
Humidity control range: 50%-90%
Humidity fluctuations: ±5%
Input power: 1400 W
Timing range: 0-9999 minutes
Inner liner size (mm)：510×450×1100
External dimensions (mm)：650×740×1726
Carriage: 4 pieces