Applicable Areas This is a fast and economical solution for handling liquid waste, a compact integrated vacuum operating system with independent vacuum sources. The system is compact and flexible, providing the most comfortable bench-top liquid absorption experience for your experiments.  

GL-805 Convenient and safe features
★GL-805 Unboxing the bench-type liquid suction device, take out the instrument, screw on the screw cap and plug in the power supply to use
★The vacuum pump is very quiet when working and can adjust the drainage power. A 0.22 was added to the effusion bottle and pump body um The polymer bacteria filter has an outer diameter of 55 mm, Filtration membrane diameter 47 mm, Filtration accuracy 0.22 um， It has the effect of filtering general bacteria
★Replacing the full liquid collection bottle is very convenient, just unscrew the lid and dump the waste in the bottle. GL-805 The laboratory is used
Very easy to find standard screw-hole blue cap bottle for first-class convenience
★GL-805 Small size, can be placed in any laboratory bench or laminar flow cabinet
★The built-in spill prevention device can effectively protect liquid from entering the pump body. When the liquid rises and touches the float, the float will rise and resist the collection.
The gas pipeline is used to prevent liquid from being drawn into the pump. The instrument waste liquid collection bottle is fixed in a fence to avoid accidentally touching the bottle body during operation.

GL-805 Widespread use
★From micro centrifuge tube /Small amount of liquid absorption in microwell plate
★Recovery of supernatant after centrifugation (for example: RNA/DNA extraction)
★Clean western blot or Elisa test
★Residual reagent recovery
★Western Blot Buffer
★Pull excess liquid from a slide or a petri dish
★Recycling of pathogenic bacteria
★Cell staining, extraction of cell culture medium
★When ordering, you can choose a light-proof brown collection bottle as needed (standard configuration is transparent blue cap bottle)

Friendly tips:
1.Please tighten the lid after changing the collection bottle or pouring out the waste liquid. If it is not tightened, it will cause air leakage during the suction and cause inability to absorb liquid.
2.Waste liquid is collected to 800 ml The waste liquid should be poured out in time, otherwise the waste liquid may be sucked into the instrument pump body to damage the instrument. This behavior
It is not covered by the warranty, please pay special attention when using it.
3.Please clean the instrument pipeline frequently. If the pipeline is not cleaned for a long time, some fungi may grow in the pipeline and block the pipeline, causing no
Method for absorbing liquid.  

Technical parameters